Bathtub Refinishing Services
At New Shine Tub & Tile Refinishing, we want to help you keep your bathroom looking like new without having to replace expensive fixtures. Our bathtub refinishing services offer an affordable and quick solution, with projects that can be completed in half a day or less! That means the same tub you’ve been looking at for years will look brand new since all of the scratches, chips and other wear-and-tear damage will be gone.
Not only will it look and feel better, but you’ll also save money by not needing to buy a replacement. We use the best quality materials available so our results look great and last for years. With our bathtub refinishing services, you don’t have to replace when you could refinish–let us show you how easy it can be!
Bathtub Resurfacing Process in Columbus Ohio
Are your bathtubs looking a bit dingy these days? Fear not! Resurfacing them is an easy and affordable way to make them look brand new again. Below we are going to cover a birds-eye view of the four main steps New Shine Tub & Tile Refinishing takes when you choose us for your next refinishing project!
The following are the 4 key areas when we take on a new resurfacing project for a customer but is not limited to the entire scope of work that is performed.
1. Clean The Tub
The first step in the process of resurfacing your bathtub is to give it a thorough cleaning. This will make sure that no dirt, grease, or mildew remains on its surface which could interfere with the overall finishing process.
We wash down the tub and then scrub off any stubborn buildup or stains with a stiff brush. Rinsing it well afterwards and drying it with a clean towel before we move on to the next step. In some situations your bathtub may need stripped of the existing coating before the refinishing process can take place.
2. Prepare The Tub For Resurfacing
Once your tub has been cleaned, we will perform some basic preparation work before beginning the resurfacing process. Starting by filling in any cracks or chips in the tub’s surface so that it can be painted over smoothly later on.
Next, sand down both the inside and outside of the tub with medium grit sandpaper until you have a smooth overall surface texture.
3. Paint Your Tub
Now comes time for painting your tub! We use spray painting tools to apply even coats of high quality paint specifically designed for bathrooms and sink fixtures onto your tub’s surfaces. Depending on the surface of the bathtub will depend on how many coats will be needed. We will go over the scope of work before performing the resurfacing that will get you best results possible!
4. Finishing Touches & Cleanup
Once coat(s) of paint have been applied, we can add any additional design touches or finishes that you wish such as non-slip strips or fixtures into place if necessary. Finish off any other details, clean up the dirt, debris, or any other tools needed to complete the refinishing project and — voila! Your bathtub will be ready for use shortly. We recommend waiting and not using the tub for anything for at least 24 hours after the application.
Avg. Cost To Replace A Bathtub
The cost to replace a bathtub can range greatly depending on the materials and labor. That range can be $1K-$5K with the average being $2,500! Save your time and money choosing to refinish. Call today!
Types of Bathtubs We Refinish
Freestanding Clawfoot Bathtubs
Freestanding Clawfoot bathtubs are a timeless classic and are making a comeback recently. These tubs come in traditional porcelain designs or updated styles crafted from acrylic and fiberglass – whichever you choose, you’ll feel like you’ve stepped back in time, as these tubs have been around for decades.
These freestanding tubs are finished on all sides so they truly make an incredible statement piece, with many design options available ranging from the classic clawfoot style to more modern bowl-like layouts. Not to mention they’re also larger than other types of bathtubs! You can really enjoy some luxurious additions to your home when choosing this type of bathtub. If you are able to get your hands on an older one that could use some TLC, New Shine Tub & Tile Refinishing can resurface your tub like new!
Corner Bathtubs
Corner Bathtubs are a great option if you’re looking for a bathtub that fits into the corner of a room. They usually come in sizes between 55 to 65 inches wide and make great use of space. Plus, some larger models are even spacious enough for two people.
However, they tend to be more expensive than other types of tubs, but this makes them great candidates to be reglazed to make them look brand new again as opposed to replacing. The savings could be spent on other home updates and projects!
Tub & Shower Combos
Corner Bathtubs are a great option if you’re looking for a bathtub that fits into the corner of a room. They usually come in sizes between 55 to 65 inches wide and make great use of space. Plus, some larger models are even spacious enough for two people.
However, they tend to be more expensive than other types of tubs, but this makes them great candidates to be reglazed to make them look brand new again as opposed to replacing. The savings could be spent on other home updates and projects!
Alcove Bathtubs
Alcove bathtubs are great for homes which don’t have a lot of space or for those looking to add a bit of luxury to their bathroom. These tubs are walled in on three sides, meaning that they can be combined with either a central shower or one at either end. Also, they can be fitted with a tile surround for an extra layer of decor in your bathroom. Both alcove bathtubs and tile surround are able to be refinished as well!
The standard length of an alcove tub is usually around 60 inches, however you can also find smaller tubs if you need something that fits into a space already available in your home. As these types of bathtubs have ample tiling and paneling options, they provide plenty of opportunities to make them look luxurious enough to fit any decor!
Drop-In Bathtubs
Drop-in bathtubs offer an incredible amount of versatility and can truly be customized to fit any bathroom space. Thanks to their frame-less design, they can easily fit into a narrow area or oddly sized alcove with ease. Plus, their rim makes it possible to even sink them into the floor.
Another great perk of having a drop-in tub is that one can construct their own surround, allowing for ultimate creativity when designing the perfect look for your bathtub. You can customize the width of the tub surrounding for functional reasons such as faucet placement, or simply opt for a larger one to leave enough room for a few trinkets like candles, flower vases and perhaps even some wine glasses!
Although these types of bathtubs are surprisingly affordable, refinishing is always a more cost effective option to updating your existing fixtures and can save roughly 70-80% choosing to replace your bathtub.
Call Us Today to Learn About The Benefits of Refinishing!
Once the refinishing process is complete, your bathtub will be ready to use within 24 hours. However, it is important to note that if you have the option to use another bath or shower and can wait closer to 48-72 hours before using that refinished tub or shower that would be more beneficial. This allows the coating to fully cure and bond with the surface of the tub, ensuring a long-lasting finish.
Yes, you can resurface an old bathtub! Bathtub refinishing or resurfacing of other things in your home is a great way to restore the look of your bathtub, countertops, tile, and more without having to replace it entirely. The process involves removing any existing damage, such as rust or chips (stripping the surface – which may include additional fees), and then applying a specialized coating that will protect the surface from further wear and tear.
Having your bathtub refinished can last a number of years with proper care and maintenance. The coating applied during the refinishing process is designed to be durable and long-lasting, but it is important to take steps to ensure that the finish remains in good condition for as long as possible. This includes but not limited to avoiding abrasive cleaners, using a soft cloth when cleaning.
If your reglazed tub is peeling, it could be due to a number of factors. One of the most common causes is improper preparation of the surface before refinishing. If the surface was not properly cleaned and prepped, the coating may not adhere correctly and can start to peel off over time. Additionally, if the coating was applied too thick or not allowed to cure for long enough. There are a number of factors why your refinished surface could be peeling and hard to narrow it down to one specific thing without really knowing the entire scope of the project.
Refinishing a bathtub typically takes between 4-6 hours, depending on the size and condition of the tub. But in most cases the project can and should be completed in a half days time.
